Skip Navigation Linkswww.huber-online.com > US-English > Products > Product Datasheet

Huber Unistat Tango wl with Pilot ONE Dynamic temperature control system / circulation thermostat
Quotation Data sheet 3-2-2 Warranty Downloads Operating manual Accessories Case Studies
Wishlist

The Unistat range inspires with unique thermodynamic properties and a range of functions to meet the highest demands. Unistat technology guarantees precise, reproducible temperature control results, the shortest possible heating and cooling times and large temperature ranges without the need for fluid change. All Unistats are fitted with the innovative Pilot ONE controller with a 5.7“ touchscreen colour display and easy menu navigation. All important parameters can be seen at a glance and temperature curves are displayed in graphic real time. Unistats are equipped with the most up-to-date pump technology for optimal heat transfer. The pump self regulates to ensure the best possible circulation and flow and delicate glass reactors are protected from breakage by the pumps soft start-up feature. Unistat technology impresses as a result of economic operation with reduced operating costs and efficient energy management. Because Unistats are hydraulically sealed, the service life of the temperature control fluid is dramatically increased by preventing oil loss through vapours and oxidation, further saving resources. Unistats are fitted with extensive safety equipment and are therefore suitable for unsupervised continuous operation. Relevant operating conditions are constantly monitored and the system is switched off if necessary or with the process safety feature the emergency cooling circuit is activated.  
 The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the touchscreen. Thanks to the new favourites menu, the one-click operation and the integrated technical glossary the operation is very easy, just like on a smartphone. Integrated USB and Ethernet ports allows connection to a PC or network, e.g. for remote control or data transmission.
 
Precise and reproducible temperature control results    
Fastest heating and cooling rates    
Wide temperature ranges with no fluid change    
Pilot ONE controller with 5.7“ touchscreen and comfortable menu navigation    
Adaptive temperature control, self-optimising    
Efficient circulation pump    
2 x USB (Host and Device), Ethernet and RS232 interfaces    
Efficient operation saves working time and operating costs    
Proven functionality for the process industry    
E-grade "Professional" included    
  
 
General information & temperature controller 
Temperature range  -45...250 °C
Temperature stability ±0.01 °C
Temperature control TAC, self-optimizing (True Adaptive Control)
Display resolution  0.01 °C
Alarm message  optical, acoustical  
Controller Pilot ONE  (E-grade "Professional")   
Safety class  III / FL  
Protection class  IP20  
Dimensions (W x D x H) 426 x 307 x 631 mm  |  16.77 x 12.09 x 24.84 inches
Weight 67 kg  |  147.74 pounds
Heating / cooling capacity 
Heating capacity  3 kW
Cooling capacity
2502001000-20-40  °C
0,70,70,70,70,40,06  kW
Cooling machine air- and water-cooled  
Refrigerant  R507 (0,49 kg)  
Circulation pump  
Pressure pump max.  55  lpm ; 0.9  bar  |  14.53 gpm ; 13.05 psi
Pump connection  M24x1,5 AG male  
Permissible viscosity  50 mm²/s
Connections 
Pt100 connection  Pt100  
Analogue input  via optional Com.G@te
Analogue output  via optional Com.G@te
Digital interface  RS232, Ethernet, USB Device, USB Host  
Operating data
Permissible ambient temp. 5...40 °C
Filling volume min.  1.5 Liters  |  0.4 gal
Volume of expansion 2.8 Liters  |  0.74 gal
Cooling water connection  G1/2 AG  
Cooling water consumption  54 l/h
Cooling water pressure max. 3 bar  |  43.5 psi
Power supply 208V 2~ 60Hz    Available power supply versions:


208V 2~ 60Hz (Heating capacity: 3 kW)
230V 1~ 50Hz (Heating capacity: 1,5 kW)
400V 3~ +N 50Hz (Heating capacity: 3 kW)

Further information about the available main powers on request.
Current max. 18 A
Fusing 2x20 A  
Miscellaneous
Please take further technical information as well as information about the scope of delivery, accessories and peripheral devices from the PDF data sheet. In cases of doubt the details given in there apply. If nothing to the contrary is quoted then the performance data referred is at an ambient temperature of 20°C.

Please observe the
notes on installation and/or the space requirements of our products.

The following voltage and frequency tolerances apply based on EN60034-1:
Voltage +/- 5% for a frequency tolerance at the same time of +/- 2%

Examples to illustrate this: Not permissible, for example. is -5% on the voltage and +2% on the frequency. Permissible, on the other hand, are tolerances of -5% on the voltage and -2% on the frequency.

We reserve the right to make technical changes and correct errors. Illustrations can deviate from the original.
 
Unistat Tango wl
  Show more downloads...
 
  Order information  
  Model:  Unistat Tango wl    
  Order no.:  1000.0024.01    
  Group: G3    
  List price:  22.132,00 USD  
 

Functions
 

 
 
 
 
 
 
5.7" TFT touchscreen display
Operation occurs over a colour 5.7“ touchscreen display with a comfortable menu navigation. All important parameters such as process temperature, jacket temperature, temperature control fluid pressure and safety equipment can be seen at a glance. Temperature curves are even displayed graphically in real time.
True Adaptive Control (TAC)
The True Adaptive Control (TAC) technology goes one step further compared to the majority of automatic PID controllers. TAC analyses the controlled system in the whole temperature range and adapts the also control parameters optimally for strongly fluctuating plant conditions. The TAC technology permanently ensures the shortest regulating times. The classic PID control functions are also adjustable manually instead of the True Adaptive Control.
E-grade Professional installed as standardInklusive E-grade Professional
All Unistats have the E-grade Professional installed as standard.
Integrated programmer
Temperature profiles can be specified and executed using the integral programmer. The individual program steps can be distributed whereby every program step can be executed either temperature stable or time stable. Also functions such as potential-free contact, analogue output, temperature control mode can be activated or deactivated for every program step. Models with the Pilot ONE Professional controller can also be fitted with a ramp function for non-linear temperature curves (e.g. for crystal growing).
Pressure regulation VPC
VPC was developed in order to protect glass reactors from being destroyed by an excessively high pressure. Furthermore, the viscosity of the temperature control liquid for heating or cooling alters, which is balanced out by the VPC. Models with VPC have a rotational speed controlled pump with a gentle start-up and can control the pressure using a pressure sensor. VPC ensures a minimum pressure for maximum circulation and therefore optimises delivery of heat to the application.
USB interfaces
Models with the Pilot ONE controller has two USB interfaces fitted as standard. Via the USB ports data can easily be stored directly onto a USB stick. The USB port also allows connection to a PC or notebook. Together with the spy software, requirements such as remote control or data transmission are easy and cost-effective.
Ethernet interface
The built-in RJ45 Ethernet connection on the Pilot ONE controller allows easy integration into LAN networks. Remote control, data logging, or integration into process control systems is also straightforward.
RS232 interface
The integral RS232 interface allows data communication with computer or process control systems. Measurement data can be transmitted and saved or control commands transmitted to the temperature control machine dependent on the intended use. The software programs SpyLight, SpyControl and SpyWatch allow simple and comfortable connection with Windows PCs.
Compatible with SpyControl
SpyControl is a software for controlling devices and recording and visualising measurement data. The software allows controlling of one or more devices by a programmer. The user can prescribe temperature control programs which then run automatically. The segments of a temperature control program are entered in a user-friendly way into the so-called temperature control program Xplorer. The temperature control programs so created can be modified and archived in any way needed. The principle progress of a temperature control program is visualised in a further graphic.
Plug & Play control technology
The tried and tested Plug & Play technology is unique and shines in the case of service being necessary because of simple exchange of the controller. Thermostats and chillers function with uniform operation – a decisive advantage for all users of various Huber temperature control machines. The controller Pilot ONE can be exchanged with each other and can be used over a data cable as remote control. The Pilot controllers are setting new standards regarding functionality and flexibility.
Easy Control operating concept
You always have everything under control with Easy Control. A simple and intuitive user interface allows quick access to all major system functions and settings. All messages appearing in plain text on the display.
Protection+ safety functions
Models with protection+ are fitted with large range of safety equipment for unmonitored and secure continuous operation. Overtemperature values, nominal value and alarm limits are adjustable to the temperature controlled application dependent on the framework conditions. The temperature and pressure sensors are calibratable and monitor the operation condition. Passive components achieve extraordinarily high reliability. In the event of an accident Unistats are switched off at all poles. Additional emergency cooling circuits can be activated for critical processes.
Explosion protection ATEX
There are two alternatives for explosion-protected plant: With the ATEX-compatible remote control Unistat II 2G Ex ib IIC T4 for installation of Unistats outside the Ex zone or inside the Ex zone as a complete solution in a pressurized enclosure Ex-p-Sch If you have any questions on the topic explosion protection and ATEX then please contact our Sales hotline.
Higher heat output
Many Huber temperature control machines can be fitted at the works on request with a higher heat output. This means shorter heating up times are possible also for applications with large fluid volumes. You save time and allow more rapid production processes and a higher throughput dependent on the application.
 
Peter Huber Kältemaschinenbau Home  |  Contact  |  Terms & Conditions  |  Imprint  |  Sitemap